Eiki LC-X80 Manual de usuario descargar pdf (Pagina 21)

LC_X80 Basic Serial Command Functional Specifications

21/23

indicates Abnormal Temperature caused turning to Standby status.

This status continues until the next operation is started; when Power On is executed, the

projector clears the information of Abnormal Temperature and normal operation starts.

・ “24” [CR]

Status: Power-Save Cooling Down in process

This indicates Power Management in the Setting menu is enabled and Power-Save

Cooling Down operation is in process.

During this time, any Functional Execution Command is invalid.

In this Power-Save Cooling Down function, the status moves to Power Save after the given

Cooling down operation.

Status： No signal Power-Save Cooling Down Power Save

Response： “00” “24” “04”

No signal status has passed for the time

set by power management timer After about 90 sec.

・ “04” [CR]

Status: Power Save

This indicates it moves to Power-Save status by Power Management function as set in the

Setting menu.

・ “21” [CR]

Status: Cooling Down in process after OFF due to Lamp Failure

When the projector is turned off due to lamp failure, it automatically starts Cooling Down

operation. The projector returns “21” [CR]. “21” [CR] has been kept during Cooling Down

operation.

・ “81” [CR]

Status: Standby after Cooling Down due to Lamp Failure

The projector has recovered from Lamp Failure status. When the projector enters Standby

status after Cooling Down operation invoked due to lamp failure, it returns “81”. This indicates

the status turns to Standby due to lamp failure. This status continues until the next operation

is started; when Power On is executed, the projector clears the information of Lamp Failure

and normal operation starts.

1 2 ... 16 17 18 19 20 21 22 23

Sin comentarios

Eiki LC-X80 Manual de usuario Pagina 21