Eiki NPC-1 Manual de usuario descargar pdf (Pagina 15)

- 13 -

DHCP setting

This topic is applicable if you are using a DHCP (Dynamic Host Configuration Protocol)

server in your network. This type of server is set up to provide IP addresses for new

devices as they log onto a network. As the operation of the NPC-1 requires a fixed IP

address, we strongly recommend that you establish an IP reservation list in DHCP to

maintain fixed IP assignments based on the NPC-1’s MAC address. The MAC address

can be found on the bottom panel of the NPC-1 or by accessing the MAC address

through a search function in the NetControl software.

Follow the instructions for selecting a NPC-1 device to pick a NPC-1 device from the

search list. You will see the actual data for the projector location, IP address, netmask,

gateway and DHCP setting in the edit fields.

The NPC-1 device is shipped with DHCP setting off (check box is NOT checked).

If you are unsure about changing the DHCP setting please ask your system administra-

tor. Click the Change button to save the DHCP setting.

You can close the window by clicking on the Close Tool button.

manual.pmd 3/18/2003, 6:32 PM13

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Sin comentarios

Eiki NPC-1 Manual de usuario Pagina 15